Key Features

• Complies with 802.3u 10/100Base-TX, 100Base-FX standards
• Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
• Ranges up to 2km (1.2 miles) transmission distance with multi-mode fiber

Tp-link MC110CS Single Mode Media Converter

The Tplink 10/100Mbps Single-Mode Media Converter MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

TP-Link MC200CM Gigabit Multi-Mode Media Converter

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data

TP-Link CPE220 300Mbps 12dBi Outdoor CPE

Key Features

• Built-in 12dBi 2×2 dual-polarized directional MIMO antenna
• Adjustable transmission power from 0 to 30dBm/1000mw
• System-level optimizations for more than 13km long range wireless transmission
• TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
• Centralized Management System – Pharos Control
• AP / Client / AP Router / AP Client Router (WISP) operation modes
• Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

TP-Link CPE510 5GHz 300Mbps 13dBi Outdoor CPE

P-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost-effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint, and outdoor Wi-Fi coverage applications.

TP-Link MR3040 150N 3G/4G Wireless Router with battery

Key Features

•  Share a 3G/4G mobile connection, compatible with LTE/HSPA+/HSPA/EVDO/UMTS    3G/4G USB modems
• · Battery-powered, portable design, light and small enough for you to take anywhere
• ·  Wireless N speed up to 150Mbps
• ·  IP-based bandwidth control allows administrators to determine how much band width    is allotted to each connected device
• ·  A micro USB port to be connected to your laptop or power adapter for the power supply
• ·  Three working modes: 3G/4G Router, WISP Client Router, AP Mode

Tp-Link R470T Load balance Router

The TL-R470T+ load balance broadband router is a wise choice for small businesses. It brings you a high return on investment with low overhead. Featuring three changeable WAN/LAN ports, TL-R470T+ supports up to 4 WAN ports, which can satisfy various Internet access requirements through one device. TL-R470T+ integrates multiple load balancing strategies, advanced QoS, and a strong firewall to provide you with consistent network uptime and reliable Ethernet connectivity. Moreover, it is easy to manage the TL-R470T+ via a web browser, which makes building and managing your network more convenient.

Tp-Link R480T+ Load Balance Broadband Router

The TL-R480T+ load balance broadband router is a wise choice for small businesses. It brings you a high return on investment with low overhead. Featured with three changeable WAN/LAN ports, TL-R480T+ supports up to 4 WAN ports, which can satisfy various Internet access requirements through one device.

TP-Link RE210 AC750 Dual Band WiFi Range Extender

Key Features

• Boosts your wireless signal, eliminating previously inaccessible areas or “dead zones”
•  Supports all 802.11 a/b/g/n/ac standards of Wi-Fi routers and wireless access points
•  Wireless AC technology delivers combined dual-band speeds of up to 750Mbps*
•  Gigabit Ethernet port allows the extender to connect to wired devices as a wireless bridge
•  Its compact, wall-mounted design allows for easy, flexible deployment

TP-Link SF1008D 8 port Desktop Switch

The TL-SF1008D Fast Ethernet Switch is designed for SOHO (Small Office/Home Office) or workgroup users. All 8 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with innovative energy-efficient technology, the TL-SF1008D can save power consumption, making it an eco-friendly solution for your business network.

Hardware features

• Standards and Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
  CSMA/CD
• Interface: 8 10/100Mbps Ports, Auto-Negotiation, Auto-MDI/MDIX
• Fan Quantity: Fanless
• External Power Supply: 100-240VAC, 50/60Hz
  (Output: 9VDC / 0.6A)
• Buffer Size: 768Kb
• Data Rates: 10/100Mbps at Half Duplex ;
  20/200Mbps at Full Duplex
• LED Indicator: Power
  Port network activity (on the network module)
• Dimensions ( W x D x H ): 5.3 × 3.1 × 0.9 in. (135 × 79 × 23mm)
• Max Power Consumption: 2W
• Max Heat Dissipation: 7.0 BTU/h

TP-Link SF1016D 16 Port Desktop Switch

The 16-Port 10/100Mbps Desktop/Rackmount Switch TL-SF1016DS provides you with a high-performance, low-cost, easy-to-use, seamless, and standard upgrade to improve your old network to a 100Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with innovative energy-efficient technology, the TL-SF1016DS can save on power consumption and most of the packaging material can be recycled, making it an eco-friendly solution for your business network.