All In One RJ45 RJ11 USB and BNC Cable Tester
All In One RJ45 RJ11 USB and BNC Cable Tester
All-in-one tester, designed for testing RJ45, RJ11, USB and BNC cables.
Key Features
KSh2,500.00
Buy the All In One Cable Tester in Nairobi Kenya at flannetworks
All In One RJ45 RJ11 USB and BNC Cable Tester
Multi Function RJ45 RJ11 USB and BNC Cable Tester offers a simple way to test RJ45, RJ11, USB and BNC cables, eliminating time and hassle.
Key Features
- Test correct pin configuration for RJ45, RJ11, USB and BNC Cables
- Remote unit allows diagnostic testing between different areas of the network
Based on 0 reviews
Be the first to review “All In One RJ45 RJ11 USB and BNC Cable Tester”
Related products
-
Tools
Buy 250µm Fiber Coating Stripper in kenya
250µm Fiber Coating Stripper
An effective tool for stripping 250µm buffer coating. Incorporates a precision 0.005” laser-drilled hole in the cutting blade. Ideal for loose tube fibers.
Key Features
- CFS-2 for stripping 250-micron buffer coating to expose 125-micron cladded fibre
- Second hole for stripping 2-3 mm fiber jackets
- Pre-set at the factory—no adjustments needed
- Will not scratch or nick glass fiber
- All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips
- Comfort-grip, ergonomic handles
- Lock to hold tool closed when it is not in use
- Length: 6.5 in (165 mm)
- Weight: 4.2 oz (119 g)
- CFS-2 Part No.: 46107-M
SKU: n/a -
Tools
Buy Network Monitoring Cable Tester LCD NF-308 Wire Fault Locator in Kenya
Network Monitoring Cable Tester LCD NF-308 Wire Fault Locator
Key Features
- Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables.
- 2. Hub blink for locating network port by the flashing port light on Hub / Switch.
- 3. Check wiring error in 5E, 6E, coaxial cable, such as open circuit,short circuit, jumper wire, reverse connection.
- 4. Locate the wiring or connection error.
- 5. Measure cable length up to 1000m and locate the breakage point.
- 6. polarity test function measure DC voltage. 7. Memory and storage for calibration data.
- 8. Automatically time-delay shut off and Low battery alarm function.
SKU: n/a -
Tools
Buy Punch down krone Tool-110 Cross Connect in kenya
Punch down krone Tool-110 Cross Connect
Punch Down Tool is used to seat wires in any number of different connectors, with interchangeable ends, it is the most commonly used tool in the networking industry for connecting the wire to a patch panel or keystone jack using a Krone or 110 IDC end.
SKU: n/a -
Tools
S-Tek-773332 Networking Repair Tool Kit | flannetworks
S-Tek-773332 Networking Repair Tool Kit
The S-Tek-773332 Networking Repair-Tool Kit-56Pieces allows the professional installer or armature enthusiast to handle cabling, terminating and troubleshooting with ease. The Networking ToolKit 773332 comes with fully demagnetized tools, thus offering you with full protection of the computer hard drive or magnetic media from damage.
SKU: n/a -
Tools
Buy Precision Fiber Cleaver FC-500 in kenya
Precision Fiber Cleaver FC-500
Key Features
- PRECISE CLEAVING: Provides a cleave with a cutting angle of less than 0.5° for optimal fiber preparation for fusion splicing.
- BUILT-IN FIBER HOLDER: The fiber cleaver can hold 250µm,900µm and 3.0mm single fiber with a readable scale for accurate cleave lengths from 5 to 25mm.
- VERSATILE USE: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice.
- DURABILITY: Lightweight and rugged design increased durability. Also easy to disassemble and operate, allowing easy blade replacement.
- BLADE LIFE: 48000 times(3000*16) .
SKU: n/a
There are no reviews yet.