Buy SOPTO Standalone 4 PON EPON OLT in kenya
SOPTO Standalone 4 PON EPON OLT
Specifications:
- Size : 440*230mm*44mm(L*W*H)
- Weight : 3.4kg
- Power Consumption : 34W
- Power supply : 220VAC, AC: 90V～240V，47/63Hz
- Working environment : Working temperature = 0～50℃, Storage temperature = -40～85℃Relative, Relative humidity = 5～90% (Non-condensing)
- Management Mode : SNMP, Telnet, CLI management mode.
- Management Port : 1*10/100/1000Mauto-negotiable outband port, 1CONSOLE port
- Uplink Port : QTY = 8, Copper = 10/100/1000M auto-negotiable,RJ45:4pcs, SFP = 4 SFP slots,
- PON Port : Quantity = 4, Physical interface = SFP slot, Connector Type = 1000BASE-PX20+ , Max splitting ratio = 1:64
- PON Port attribute : Transmission distance = 20KM, Port rate = Symmetrical 1.25Gbps, Wavelength = 1490nm TX,1310nm RX, Interface type = SC/PC
- Fiber type = 9/125μm SMF (Single Mode Fiber), TX Power = +2.5～+7dBm, Rx Sensitivity = -27dBm, Saturation power = -6dBm
KSh70,000.00
Buy the best SOPTO Standalone 4 PON EPON OLT in kenya at flannetworks
SOPTO Standalone 4 PON EPON OLT
provides 4GE and 4 SFP slots interface for uplink, and 4 EPON ports for downstream. It can support 256 ONU under 1:64 splitter ratio. The OLT can be used for “Triple-Play”, CPN, IP Camera, Enterprise LAN and IOT applications. 4PON EPON OLT is a high-performance product.
Key features
- Four pon port in 1U pizza-box
- Four uplink GE optical SFP ports
- Four uplink GE RJ45 copper ports
- NMS management based on standard SNMP protocol
- Double 220VAC or -48VDC redundancy power supply
- Double 220VAC or -48VDC redundancy power supply
For application Diagram
Based on 0 reviews
Be the first to review “Buy SOPTO Standalone 4 PON EPON OLT in kenya”
Related products
-
Fiber, Networking Equipment
Purchase the best SPU-G120W-HR GPON ONU in Kenya
SPU-G120W-HR GPON ONU
SPU-G120W-HR GPON ONU is one of the GPON optical network units design to meet the requirement of the broadband access network. It applies in FTTH/FTTO to provide the data service based on the GPON network.
GPON is the latest generation of access network technology. ITU-TG.984 is the standard protocol of GPON. The GPON standard differs from other PON standards in that it achieves higher bandwidth and higher efficiency using larger, variable-length packets.
SKU: n/a -
Fiber, Networking Equipment, sopto
Buy 10-1000M 1 UTP Fiber Converter |flannetworks
10-1000M 1 UTP Fiber Converter
The 10/100/1000M media converters are designed to transmit and receive data over optical fiber. The electrical interface will Auto-Negotiate to a 10Mbps, or 100Mbps, or 1000M Ethernet rate without any adjustments. SOPTO provides two types of 10/100/1000M Media converters, SFP Gigabit media converters, and normal Fiber Media converters.
SKU: n/a -
Fiber
Buy 8FE Reverse PoE EPON ONU |flannetworks
8FE Reverse PoE EPON ONU
It is a box-type device measuring 1-U high and 11-inch wide, providing one GPON uplink port and eight LAN user ports, and is powered by the power sourcing equipment (PSE) deployed in users’ residences. It is applied in scenarios where there is no alternating current (AC) power supply in corridors, featuring easy installation and maintenance, broad temperature range, low power consumption, mute design, high stability, environment-friendlily, and energy conservation.
SKU: n/a -
DLink, Fiber
Buy Media Converter Multimode 1300nm 2km |flannetworks
Media Converter Multimode 1300nm 2km
The DMC-300SC by D-Link® is a media converter designed to connect 10BASE-T/100BASE-TX copper to 100Base-FX fiber media and vice versa. Based on the IEEE 802.3 and 802.3u standards, the DMC-300SC is designed for use with multimode fiber cable utilizing the SC-Type connector. The DMC-300SC supports shortwave (SX) laser specifications at a full wire-speed forwarding rate
SKU: n/a -
Fiber, Networking Equipment
Buy SAT-3C04 Optical Visual Fault Locator in kenya
SAT-3C04 Optical Visual Fault Locator
- It is used for optical identification, fault locating of SM fiber or MM fiber,which is a basic maintenance tool of optical network, LAN, FDDI, ATM optical system, and telecom network system,
suitable for field working.
SKU: n/a - It is used for optical identification, fault locating of SM fiber or MM fiber,which is a basic maintenance tool of optical network, LAN, FDDI, ATM optical system, and telecom network system,
There are no reviews yet.