-
×
Buy Ubiquiti airFiber 5XHD Radio System
1 × KSh50,000.00
Subtotal: KSh50,000.00
Ubiquitti Wireless
Showing 1–12 of 14 results
-
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy 5GHZ MIMO SECTOR AIR MAX 90|flannetworks
5GHZ MIMO SECTOR AIR MAX 90 Specs
- Frequency Range: 5.15 – 5.85 GHz
- Gain: 19.4 – 0.3 dBi
- HPOL Beamwidth: 91° (6 dB)
- VPOL Beamwidth: 85° (6 dB)
- Electrical Beamwidth: 4°
- Electrical Downtilt: 2°
- Max. VSWR: 1.5:1
- Wind Survivability: 125 mph
- Wind Loading: 41 lbf @ 125 mph
- Polarization: Dual-Linear
- Cross-pol Isolation: 28 dB Min.
- ETSI Specification: EN 302 326 DN2
- Mounting: Universal Pole Mount, RocketM Bracket, and Weatherproof RF Jumpers Included
- Dimensions: 700 x 135 x 73mm (27.56″ x 5.32″ x 2.87″)
- Weight: 5.9 kg (13 lbs)
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy In–Wall 802.11ac Wi–Fi AP access point|flannetworks
Networking Equipment, Ubiquiti, Ubiquitti WirelessBuy In–Wall 802.11ac Wi–Fi AP access point|flannetworks
In–Wall 802.11ac Wi–Fi AP access point specs
- Model: Ubiquiti UniFi AC In-Wall
- Frequency Band: 2.4 GHz and 5 GHz
- Wireless Standards: 802.11ac dual-band
- Wireless Speed:
- 2.4 GHz: Up to 300 Mbps
- 5 GHz: Up to 867 Mbps
- Antenna Gain: 2.4 GHz – 2 dBi, 5 GHz – 2 dBi
- Multiple SSIDs: Up to 4 SSIDs per radio
- Wi-Fi Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- Power over Ethernet (PoE) Support: No (requires a separate power source)
- Ports: 2 Gigabit Ethernet ports (1 for data, 1 for pass-through)
- Maximum Power Consumption: 7W
- Mounting: In-wall mount (fits standard single-gang electrical box)
- Dimensions (W x D x H): 86.7 x 86.7 x 30.7 mm (3.41 x 3.41 x 1.21 inches)
- Weight: 200 g (7.05 oz)
- Wireless Range: Up to 100 meters (328 feet)
- Wi-Fi Standards: 802.11a/b/g/n/ac
- MIMO: 2×2 MIMO technology
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy Litebeam ac gen2 in kenya
Litebeam ac gen2, Ubnt litebeam range and specs.
Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the Litebeam ac , with dedicated Wi-Fi management. Improved Noise Immunity .
The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam ac gen2 range blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Innovative Design Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy the best Ubiquiti UniFi AP AC PRO in kenya
UniFi AP AC PRO specs
Technical Specifications
Mechanical
Dimensions Ø196.7 x 35 mm (Ø7.7 x 1.4″)
Weight Without mount: 350 g (12.4 oz),
With mount: 450 g (15.9 oz)Hardware
Networking interface (2) GbE RJ45 ports
Management interface Ethernet
Power method PoE
48V Passive PoE
Power supply UniFi PoE switch
48V, 0.5A PoE adapter (Included)*
*5-packs do not come with PoE adapters.
Supported voltage range 44—57V DC
Max. power consumption 9WMax. TX power
2.4 GHz
5 GHz
22 dBm
22 dBm
MIMO
2.4 GHz
5 GHz
3 x 3
3 x 3Throughput rate
2.4 GHz
5 GHz
450 Mbps
1300 Mbps
Antenna gain
2 GHz
5 GHz
3 dBi
3 dBi
Button Factory reset
Mounting Wall/ceiling (Included)
Operating temperature -10 to 70° C (14 to 158° F)
Operating humidity 5 to 95% noncondensing
Certifications CE, FCC, ICSoftware
WiFi standards 802.11 a/b/g/n/ac
Wireless security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID 4 per radio
VLAN 802.1Q
Advanced QoS Per-user rate limiting
Guest traffic isolation Supported
Power save Supported
WMM Voice, video, best effort, and background
Concurrent clients 250+
Supported Data Rates (Mbps)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
802.11ac 6.5 Mbps to 1300 Mbps (MCS0 – MCS9 NSS1/2/3, VHT 20/40/80)SKU: n/a -
Ubiquiti, Ubiquitti Wireless
Buy Ubiquiti airCube AC-1 in Kenya
The Ubiquiti airCube AC is a home Wi-Fi access point designed to interoperate with airMAX CPEs
Key Features
- 24V PoE Passthrough
- Power Supply: 24V PoE or 24V PSU (Included)
- Wi-Fi Standard: 802.11ac 2×2
- Ethernet Ports: 4x 10/100/1000 Mbps
- Frequency: 2.4/5 GHz Simultaneously
- UMobile & UNMS Support
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy Ubiquiti airFiber 5XHD Radio System
Ubiquiti airFiber 5XHD Radio System
Specifications
- Frequency Range: 4.8 GHz – 6.2 GHz (Worldwide)
- Max. Conducted TX Power: 29 dBm (Dependent on Regulatory Region)
- Frequency Accuracy: < 2 ppm
- Channel Bandwidth:
– 10/20/30/40/50/60/80/100 MHz Selectable
– Programmable Uplink and Downlink Duty Cycles - Programmable Transmit Power
- Programmable Duty Cycle (GPS synchronised frames)
- Configurable GPS Synchronisation
- Split TX and RX Frequency
- Split TX and RX Channel Bandwidth
- Local Security Management for SMBs
- Dual Redundant Gigabit Ethernet Ports with PoE
- OFDM and OFDMA Support
- Bluetooth Wireless Configuration
- AlignLock™ Antenna Aiming Guard
- User-Configurable Interference Mitigation
- Redundant Images for Fail-Safe Configuration
- Persistent Spectrum Analysis with Dedicated RX
- Wide Voltage Range, Enhanced Surge Protection
The airFiber AF-5XHD also includes a special IP67 upgrade kit for enhanced protection from dust and water.
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy UBIQUITI BULLET M5HP|flannetworks
UBIQUITI BULLET M5HP specs
- Wireless IEEE 802.11a LAN network
- 5.475 – 5.825 GHz frquency
- Atheros chipset
- 16-QAM modulation
- 25 dBm +/- 2dB Atheros chipset,
- IEEE 802.11a – Wireless LAN 54Mbps, 5GHz stardard
- MIPS 24KC, 400MHz,
- 32MB SDRAM, 8MB Flash,
- 1 x 10/100 Base-TX (Cat.5, RJ-45) Ethernet Interfac
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy Ubiquiti nanostation loco m5|flannetworks
nanostation loco m5
The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry.The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events.
view datasheet.
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy Ubiquiti NanoStation locoM2|flannetworks
Ubiquiti NanoStation locoM2 specs
-
SPECIFICATION
Memory 32 MB SDRAM, 8 MB Flash Networking Interface 1x 10/100 Ethernet Port Operating Frequency 2412-2462 MHz Dimensions 163x31x80 mm Power Supply (PoE) 24V, 0.5A Polarization Dual Linear Enclosure Characteristics Outdoor UV Stabilized Plastic Mounting Pole Mounting Kit Included Operating Temperature -30 ‒ 75° C Operation mode AP, Client, WDS Encryption WEP 64/128/152, WPA, WPA2, 802.1X Wi-Fi Standards 802.11b/g/n Max.output power 23 dBm Sensitivity -83 dBm Supported OS AirOS
SKU: n/a -
-
Networking Equipment, Ubiquiti, Ubiquitti Wireless
Buy Ubiquiti Rocket Prism gen2(RP-5AC-GEN2)|flannetworks
Networking Equipment, Ubiquiti, Ubiquitti WirelessBuy Ubiquiti Rocket Prism gen2(RP-5AC-GEN2)|flannetworks
Ubiquiti Rocket Prism gen2(RP-5AC-GEN2)
The Ubiquiti Rocket Prism gen2(RP-5AC-GEN2)features revolutionary airPrism RF filtering technology, proprietary airMAX ac chipset, and dedicated management Wi-Fi for easy U Mobile app support and fast setup. Deploy the Rocket 5AC Prism Gen2 for PtP or PtMP links in high-noise environments.
SKU: n/a -
networking, Ubiquiti, Ubiquitti Wireless
Buy Ubiquiti UAP-AC-LR access point|flannetworks
Ubiquiti UAP-AC-LR access point specs
- Dimensions 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70″)
- Weight 240 g (8.5 oz) With Mounting Kits 315 g (11.1 oz)
- Networking Interface (1) 10/100/1000 Ethernet Port
- Buttons Reset
- Antennas (1) Dual-Band Antenna, Tri-Polarity, 3 dBi
- Wi-Fi Standards 802.11 a/b/g/n/ac
- Power Method Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return)
- Power Supply 24V, 0.5A Gigabit PoE Adapter*
- Maximum Power Consumption 6.5W
- Maximum TX Power 2.4 GHz 22 dBm 5 GHz 24 dBm
- BSSID Up to Four per Radio
- Power Save Supported
- Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
SKU: n/a -
Ubiquitti Wireless
Buy Ubiquiti UAP-nanoHD 802.11ac Wave 2 Access Point|flannetworks
Ubiquiti UAP-nanoHD 802.11ac Wave 2 Access Point
Ubiquiti UAP-nanoHD 802.11ac Wave 2 Access Point features simultaneous, dual-band, 4×4 MU-MIMO technology, and convenient 802.3af PoE compatibility. The compact design delivers a cost-effective combination of value and performance. The UniFi nanoHD AP can also be powered by an 802.3af PoE compliant switch.
SKU: n/a
