-
×
Ubiquiti B-DB-AC airMax AC radio
1 × KSh13,000.00 -
×
Ubiquiti airFiber 5XHD AF-5XHD
1 × KSh45,500.00
Subtotal: KSh58,500.00
Networking Equipment
Showing 361–372 of 377 results
-
Tp-link
TP-Link WN881ND Wireless N PCI Express Adapter
TP-Link WN881ND Wireless N PCI Express Adapter
Wireless N PCI Express 2.0(x1) Adapter TL-WN881ND allows you to connect a desktop computer to a wireless network and access a high-speed Internet connection. Complying with IEEE 802.11n, they provide wireless speeds up to 300Mbps, which is beneficial for online gaming or even HD video streaming.
SKU: n/a -
Tp-link
TP-Link WPA4220KIT AV500 Powerline Range Extender
TP-Link WPA4220KIT AV500 Powerline Range Extender
Key Features
- One Touch Super Range Extension – Wi-Fi Clone Button simplifies your Wi-Fi configuration and helps build a seamless unified home network
- HomePlug AV standard providing up to 500Mbps1 high speed data transmission over a home’s existing electrical wiring, ideal for lag-free HD or 3D video streaming and online gaming
- Extend 300Mbps wireless connections to previously hard-to-reach areas of your home and office
SKU: n/a -
-
Ubiquiti, Ubiquitti Wireless
Ubiquiti airFiber 5XHD AF-5XHD
Ubiquiti airFiber 5XHD AF-5XHD
Designed for use in the 5 GHz frequency band, the airFiber 5XHD features the newest radio technology, offering greater channel bandwidths (up to 100 MHz) and more advanced RF components. The AF-5XHD is also compatible with a number of existing Ubiquiti antennas from the 5 GHz band, including the Ubiquiti airFiber X Antenna AF-5G34-S45 and the Ubiquiti RocketDish RD-5G30. Pair the AF-5XHD with a compatible Ubiquiti antenna for a complete 5 GHz Point-to-Point solution.
SKU: n/a -
Ubiquiti
Ubiquiti airFiber X Antenna AF-5G30-S45
Ubiquiti airFiber X Antenna AF-5G30-S45
Operating within the 5.1 to 5.9 GHz frequency, the 2-pack of AF-5G30-S45 30dBi Antennas for airFiber AF-5X 5 GHz Carrier Backhaul Radios from Ubiquiti Networks produce a reliable point-to-point signal complete with a 30 dBi gain. In addition to the strength of the signal, the Ubiquiti airFiber X Antenna AF-5G30-S45 30dBi boasts a 90° beamwidth and a wind survivability rating of up to 125 mph. The installation has also been simplified thanks to the included pole mounting kit while the weatherproof design allows the antennas to be deployed nearly anywhere.
SKU: n/a -
Ubiquiti
Ubiquiti B-DB-AC airMax AC radio
Ubiquiti B-DB-AC airMax AC radio eliminates the need to use RF cables and requires no special antenna or tools to install. No radio card/host board issues. No RF cable quality concerns. No mechanical stability concerns. No enclosure mounting requirements. With the Bullet AC, operators can just plug and go.
SKU: n/a -
Ubiquiti
Ubiquiti NanoBeam AC Gen2 (NBE-5AC-GEN2)
Ubiquiti NanoBeam AC Gen2 (NBE-5AC-GEN2) is ideal for CPE deployments requiring maximum performance from the smallest possible footprint. Using airMAX 802.11ac technology, this nanobeam supports up to 450+ Mbps throughput in a small form factor. The NanoBeam ac directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam ac blocks or spatially filters out noise, so noise immunity is improved. Providing high performance and an innovative form factor, the NanoBeam ac is versatile and cost‑effective to deploy.
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti routers
Ubiquiti Networks 5-Port POE-5 EdgeRouter|flannetworks
Networking Equipment, Ubiquiti, Ubiquitti routersUbiquiti Networks 5-Port POE-5 EdgeRouter|flannetworks
Ubiquiti Networks 5-Port POE-5 EdgeRouter specs
Processor: Dual core 500 MHz, MIPS64 with hardware acceleration for packet processing
System Memory: 512 MB DDR2 RAM
On-Board Flash Storage: 2 GB
Operating System: EdgeOS
Serial Console Port: 1 x RJ-45 serial port
Data Ports: 2 x 10/100/1000 Ethernet router ports
Ethernet router/switch ports: 3 x 10/100/1000
Interface/Encapsulation: Ethernet, 802.1q VLAN, PPPoE,GRE,IP in IP,Bridging,Bonding (802.3ad)
Addressing: Static IPv4/IPv6 addressing, DHCP/DHCPv6
Routing: Static routes, OSPF/OSPFv3, RIP/RIPng, BGP (with IPv6 support), IGMP proxy
Security: ACL-based firewall, Zone-based firewall, NATSKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti routers
UBIQUITI Networks EdgeRouter 8 ER-8 Port Router|flannetworks
Networking Equipment, Ubiquiti, Ubiquitti routersUBIQUITI Networks EdgeRouter 8 ER-8 Port Router|flannetworks
UBIQUITI Networks EdgeRouter 8 ER-8 Port Router specs;
Dimensions: 484 x 164 x 44mm (19.06 x 6.46 x 1.73″)
• Weight: 2.3kg (5.07lbs)
• Power: 35W
• Power Method: Internal AC/DC Power Adapter, 60W (24V, 2.5A)
• Power Supply: 110-240VAC
• Button: Reset
• LED: Power
• Processor: Dual-Core 800MHz, MIPS64 with Hardware Acceleration for Packet Processing
• System Memory: 2GB DDR3 RAM
• On-Board Flash Storage: 4GB
• Certifications: CE, FCC, IC
• Rack-Mount: Yes
• Operating Temperature: -10 to 45°C (14 to 113°F)
• Operating Humidity: 10-90% non-condensing
• Layer 3 Forwarding Performance: 64 Bytes: 2,000,000 pps 512 Bytes: 8 Gbps (Line Rate)Buy the best UBIQUITI Networks EdgeRouter 8 ER-8 Port Router in kenya at flannetworks
SKU: n/a -
Networking Equipment, Ubiquiti, Ubiquitti routers
Ubiquiti Networks ER-X-SFP EdgeRouter X SFP-5|flannetworks
Networking Equipment, Ubiquiti, Ubiquitti routersUbiquiti Networks ER-X-SFP EdgeRouter X SFP-5|flannetworks
UBNT ER-X-SFP EdgeRouter X SFP-5
- Max. Power Consumption: 5W
- Max. Total PoE Output: 50W @ 24V
- PoE Output: Passive 24V (Pins 4, 5+; 7, ?
- Power Input: 24VDC, 2.5A Power Adapter (Included)
- Power Supply: External AC/DC Adapter
- Supported Voltage Range: 9 to 26VDC
- LED: Power, Link/Activity (6), PoE (5)
- Processor: Dual-Core 880 MHz, MIPS1004Kc
- System Memory: 256 MB DDR3 RAM
- Code Storage: 256 MB NAND
- Certifications: CE, FCC, IC
- Wall-Mountable
SKU: n/a -
Networking Equipment, Ubiquiti
Ubiquiti POE Adapter best quality
Ubiquiti POE Adapter
PoE (Power over Ethernet), is the technology used for power transmission in network equipment, via network UTP cable, together with data. PoE is useful in situations when we want to connect network devices that are far away from a power source. In this situation we take advantage of the Ethernet cable, because there are 4 pairs of wires, but for the majority of networks, only 2 pairs are used for data transmission. PoE uses 2 unused twisted pairs, for electrical transmission needed to power the device.
SKU: n/a -
Ubiquiti
Ubiquiti PowerBeam 5AC ISO Gen2 (PBE-5AC-ISO-GEN2)
Ubiquiti PowerBeam 5AC ISO Gen2 (PBE-5AC-ISO-GEN2) is an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference.
SKU: n/a
